BHFPB - LAGGING ADHESIVE & COATING, 713 WHITE & RED

  • MSDS: BHFPB
  • Manufacturer: VIMASCO CORP
  • Product Name: LAGGING ADHESIVE & COATING, 713 WHITE & RED
  • National Stock Number: 8040-00-273-8707
Product Identification

Product ID:LAGGING ADHESIVE & COATING, 713 WHITE & RED
MSDS Date:06/07/1989
FSC:8040
NIIN:00-273-8707
MSDS Number: BHFPB

Responsible Party
VIMASCO CORPORATION
NITRO, WV 25143
US

Emergency Phone: 304-755-3328

Info Phone: 304-755-3328

Preparer: JOHN TIDQUIST

Cage: DO737

Contractor
VIMASCO CORPORATION
516 NITRO, WV 25143 US

Telephone: 304-755-3328

Cage: DO737

Ingredients

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 2%

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


CHLORINATED PARAFFIN

CAS: 63449-39-8

RTECS: RV0480000

Fraction By Weight: 10%


VINYL ACETATE

CAS: 108-05-4

RTECS: AK0775000

Fraction By Weight: 0.2%

OSHA PEL 10 PPM/15 STEL

ACGIH TLV: 10 PPM/15,A3 STEL;93

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


HEXYLENE GLYCOL

CAS: 107-41-5

RTECS: SA0810000

Fraction By Weight: 4%

OSHA PEL C 25 PPM

ACGIH TLV: C 25 PPM; 9192


VOC. ORGANIC CMPD 78.8 GMS/L LESS WATER

RTECS: 9999999VO

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ETHYLENE GLYCOL: SKIN/EYE IRRITATION.
INHALATION-NASAL/RESPIRATORY IRRITATION.
INGESTION-DRUNKENESS/COMA/KIDNEY INJURY/DEATH. CHLORINATED
PARAFFIN: SLIGHT HAZ WITH LIVER. VINYL ACETATE: EYE/RESPIRATO RY
IRRITATION AT HIGH CONCENTRATIONS.HEXYLENE GLYCOL:HIGH
CONCENTRATIONS-IRRITANT EYES/SKIN/MUCOUS MEMBRANES/NARCOSIS
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid

First Aid:SKIN: WASH W/SOAP/WATER. EYES: FLUSH W/CLEAN WATER AT LEAST
15 MIN. IF IRRITA- TION PERSISTS, CONSULT PHYSICIAN. INHALATION:
REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT, ADMINISTER OXYGEN.
IF IRRI TATION PERSISTS, CONSULT PHYSICIAN.INGESTION: GIVE 2
GLASSES OF WATER, INDUCE VOMITING, CONSULT PHYSICIAN OR
POISONCONTROL CENTER. NEVER GIVE ANYTHING BY MOUTH TO AN
UNCONSCIOUS PERSON.

Fire Fighting

Flash Point Method:TCC
Flash Point:212F 100C
Lower Limits:NOT AVAIL
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:PRODUCT WILL NOT BURN UNTIL WATER HAS
EVAPORA'D. FOR DRIED FILM/RESIDUAL SOLIDS,FULL PROTECTIVE EQUIP
RECOMMENDED INCLUDING SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE KNOWN.

Accidental Release

Spill Release Procedures:MAJOR SPILLS SHOULD BE COLLECTED FOR DISPOSAL.
MINOR SPILLS MAY BE FLUSHED TO SEWER IF REGULATIONS
PERMIT. BEFORE DRYING, PRODUCT MAY BE WASHED AWAY WITH WATER. AFTER
DRYING, REMOVE WITH A PAINT SCRAPER OR STRONG SOLVENT.

Handling

Handling and Storage Precautions:AVOID BREATHING VAPORS. AVOID
APPLICATION TO HOT SURFACES. KEEP CONTAINER CLOSED. USE W/ADEQUATE
VENTILATION. STORE INDOORS AT TEMP OF 45F-90F.
Other Precautions:FOR INDUSTRY/PROFESSIONAL USE ONLY. NOT INTENDED FOR
RETAIL SALE OR USE BY INDIVIDUAL CONSUMERS. DO NOT REUSE
CONTAINER FOR POTABLES OR EDIBLES.

Exposure Controls

Respiratory Protection:USE APPROVED CHEMICAL VAPOR RESPIRATOR IN
RESTRICTED VENTILATION AREAS. IN AP- PLICATIONS WHERE MISTS/SPRAY
MAY BE GENERATED, AVOID INHALATION OF AIRBORNE PAR-TICULATES BY
USING AN APPROVED RESPIRATO R W/ORGANIC VAPOR CARTRIDGE
W/PREFILTER.
Ventilation:GENERAL (MECHANICAL) ROOM VENTILATION IS EXPECTED TO BE
SATISFACTORY.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:GOGGLES, FACESHIELD, ETC. FOR SPLASH.
Other Protective Equipment:NONE
Work Hygienic Practices:THOROUGHLY CLEANSE HANDS AFTER HANDLING.
LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NK

Chemical Properties

Boiling Pt:B.P. Text:212F
Decomp Temp:Decomp Text:240F 115C
Vapor Density:Spec Gravity:1.29
pH:8-9
Viscosity:75,000 CENT.
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:APPRECIABLE
Percent Volatiles by Volume:60

Stability

Stability Indicator/Materials to Avoid:YES
MATERIALS INCOMPATIBLE WITH WATER.
Stability Condition to Avoid:NONE KNOWN
Hazardous Decomposition Products:THERMAL DECOMPOSITION WILL YIELD CO,
CO2, HCL, ANTIMONY- OXYCHLORIDE, AND FRAGMENTED, SHORT-CHAIN
HYDROCARBONS.

Disposal

Waste Disposal Methods:IN ACCORDANCE WITH ALL APPLICABLE REGULATIONS.
REVIEW HAZARD SECTION OF THIS SHEET BEFORE ATTEMPTING
CLEAN-UP. EMPTY CONTAINERS ARE NON HAZARDOUS UNDER RCRA AS
INDUSTRIAL WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.